Ideal size – medium left chest to full front.
Price point – mid-range to premium.
Ideal garment – medium weight to outerwear.
PMS matchable thread colors and materials.
Can print and embroider individual layers for unique combinations.
Can be laser cut into any shape.
Lion’s materials are engineered to work together allowing for countless possibilities.
Due to the complex and customizable nature of multilayer patches, these design rules are guidelines only. Rules may very depending on product combinations.
CAN BE COMBINED WITH:
12.0 x 18.0 inches. Design must be submitted at 100% actual size.
9 thread color limit. Threads can be matched to PMS colors.
No color limit. Matchable to PMS and CMYK colors.
STITCHED TEXT SIZE:
For clear legibility, satin stitched letters must be at least 1.0mm thick and 6.0mm tall.
Designs smaller than 7.0 inches = 1.0mm base material extending beyond design.
Designs larger than 7.1 inches = 1.5mm base material extending beyond design.
Minimum material column thickness: 1.0mm
Smallest disconnected design element (i.e. the dot of a letter “i”): 5.0 x 5.0mm
Minimum gap between cut out design elements: 1.0mm
Minimum perforation size: 0.6 x 0.6mm
Sharp Points: Sharp points of 60° or less will be rounded off at 0.5mm diameter (.25mm radius).
PRINTED EDGE SIZE: (BAND OF COLOR ALONG EDGE OF DESIGN)
Designs smaller than 2.0 inches = 1.0mm outer border.
Designs between 2.0 and 4.0 inches = 1.5mm outer border.
Designs between 4.0 and 7.0 inches = 2.25mm outer border.
Designs larger than 7.0 inches = 3.0mm outer border.
MINIMUM ORDER QUANTITY (MOQ):
Heat application is not recommended for garments treated with waterproof / repellent chemicals and will not bond properly.
Due to the complex and customizable nature of multilayer patches, standardized heat seal settings are currently not available. All Lion shipments come with product specific heat seal settings, and will be tailored to your order for multilayer patches.
For questions or support, email – firstname.lastname@example.org
The following instructions are for polyester or cotton garments.
For best results we recommend using a thermo couple and J wire to measure the glue line and ensure that heat is within appropriate range.
For top and bottom heat presses, covering the decoration with a thermal silicone rubber pad before heat pressing is recommended.